5 out of 5
5
3 reviews on Udemy

Cisco CCNA 200-301 (Volume 1) with Maher Haddad

Master CCNA 200-301 topics based on the Cisco 's CCNA study guide (Volume 1) and have hands-on LABS
Instructor:
Maher Haddad
621 students enrolled
English [Auto]
Get ready for the latest CCNA 200-301 exam
Understand Routing and Switching in Cisco for CCNA level
Gain hands-on LABS using practical LABS that are taught in the course

Cisco CCNA is one of the most popular in the IT field. If you have already took courses with me before, you know that I taught courses from different vendors such as MikroTik, Ubiquiti, Huawei and LigoWave. But something that not much of you know about me that I have started my career working with Cisco equipments and only Cisco and most of my experience that I have gained was from Cisco products. Starting from CCNA level up to CCNP and many Cisco specialist certificates, that’s all what I have since 17 years the time that I have started studying and working on Cisco products. I have also taught thousands of students and helped them to be CCNA certified as well.

With all of this, I have decided to build up Cisco courses to help you also passing the CCNA 200-301 exam which is the latest updated exam for CCNA.

This course will cover the CCNA Volume 1. Why Volume 1? Because this is what Cisco Press has made, they have written 2 books to cover the whole CCNA: Volume 1 and Volume 2.

In this course I have covered everything taught in Cisco Press book Volume 1 which is half way for the complete CCNA Routing & Switching. After this course I will do another course covering CCNA Volume 2 then together with this course you will have an extensive understand of the Cisco CCNA topics with a lot of Hands-on LABS.

P.S: If you have enrolled in this course before my 2nd CCNA Volume 2 course was live, then you can get mu CCNA Volume 2 course for free  when it is released but just writing me to info@mynetworktraining with your account name.

In this course, I will cover the following topics:

  • Introduction to Networking

  • First time access to the Cisco Switch

  • Local Area Network (LAN)

  • Virtual Local Area Network (VLAN)

  • Spanning-Tree Protocol

  • EtherChannel

  • IPv4 addressing

  • First time access to the Cisco Router

  • Router on a stck, Intervlan Routing, L3 EtherChannel

  • IP Routing

  • IPv6

  • OSPF

  • Wireless

Finally, if you have to be prepared for the Cisco CCNA 200-301 Routing & Switching exam, I advise you to enroll in my course and I am sure I will be able to help you to achieve the CCNA and become a Cisco Certified Engineer.

Introduction to Networking

1
Physical Hardware vs VIRL vs GNS3 vs Cisco Packet Tracer
2
OSI Model, Encapsulation vs De-Encapsulation, Protocol Data Unit (PDU)
3
TCP/IP, CSMA/CD, Collision Domain & Broadcast Domain
4
Understanding ARP, Unicast, Broadcast and Multicast
5
TCP vs UDP - Explained

First time access to the Cisco Switch

1
How to connect to the Cisco Switch to be able to configure it
2
Connecting to the Cisco Switch via the console using TerraTerm
3
User vs privilege mode, Hostname, console password, RAM vs NVRAM
4
Use ? help to get assisted with the configuration

Local Area Network (LAN)

1
Introduction to LAN (Ethernet, Straight-through, Crossover, Fiber)
2
How the switch learn the Addresses
3
Troubleshooting Interfaces on the Switch

Virtual Local Area Network (VLAN)

1
Introduction to VLAN
2
Why we need VLAN's in our network and how VLANs work - Part 1
3
Why we need VLAN's in our network and how VLANs work - Part 2
4
Creating VLANs and making the ports as access port on the Cisco Switch
5
Configuring Trunk ports on the Cisco Switch
6
Understand how Vlan Trunking Protocol (VTP) works - Server, client, Transparent
7
Understand and configure Native VLAN on Cisco Switch
8
Configuring Voice VLAN on the Cisco Switch

Spanning-Tree Protocol

1
Introduction to Spanning-Tree Protocol
2
Explaining Problems on Redundant switching without using STP
3
Explanation of how Spanning-Tree works
4
Interface States in STP
5
Difference between STP and RSTP
6
Configuring Rapid-PVST and PortFast
7
Spanning Tree BPDU Guard

EtherChannel (Link Aggregation)

1
Introduction to EtherChannel
2
EtherChannel Explained
3
Configuring EtherChannel using the Manual mode
4
Configuring EtherChannel using the PAGP mode
5
Configuring EtherChannel using the LACP mode and Load Balancing

IPv4 Addressing

1
Introduction to IPv4
2
Understand IP addressing (Public vs Private) and Subnet mask
3
Decimal to Binary conversion and vice versa
4
Subnetting calculation
5
How to calculate a summary address

First time access to the Cisco Router

1
Introduction to Cisco Router
2
What is the Cisco Router and some Basic Configuration
3
DHCP Client, Ping, Traceroute and interfaces
4
Secure the Console port on the Cisco IOS Router
5
Enable and secure Telnet on the Cisco IOS Router
6
Configuring SSH on Cisco IOS Router

Router on a Stick, Inter-VLAN Routing & L3 EtherChannel

1
Introduction to this section
2
Configuring Router on a Stick on Cisco Router
3
Configuring InterVLAN Routing on Cisco L3 Switch
4
Configuring L3 EtherChannel

IP Routing

1
Introduction to IP Routing
2
Why we need Routing in our network and what is the function of the Router
3
Static Route vs Default Route
4
Floating Static Route

Internet Protocol v6 (IPv6)

1
Introduction to IPv6
2
IPv4 Exhaustion and addresses used
3
IPv6 Successor to IPv4
4
IPv6 Characteristics
5
IPv6 internet registries (IANA, RIR, LIR)
6
IPv6 address Notation
7
How to find the prefix of the IPv6 address
8
IPv6 address types
9
IPv6 Link-local address
10
IPv6 Unique local address
11
IPv6 Multicast address
12
IPv6 Global Unicast address
13
IPv6 Static Routing
14
IPv6 Statless Autoconfiguration

Open Shortest Path First (OSPF)

1
Introduction to OSPF
2
EGP vs IGP and how Link State works
3
OSPF areas and routers tasks
4
Configuring OSPF in the backbone area
5
OSPF Hello Packets explained
6
Manipulating the Hello Packets in OSPF
7
DR & BDR Election explained
8
DR & BDR Election LAB
9
Understanding and configuring passive interface in OSPF
10
OSPF Default Route

Wireless

1
Introduction to WLAN Fundamentals
2
RF Frequency and Wavelength
3
RF Fundamentals
4
802.11 Service Sets
5
802.11 Beacon- Probing- Authentication- Association & Data
6
Free Space Path Loss (FSPL)
7
Signal Attenuation
8
2.4 GHz spectrum and non-overlapping channels
9
2.4 GHz co-interference and adjacent interference channels
10
5 GHz and Channels Bonding
11
IEEE 802.11 WLAN Standards
12
Noise Floor and Signal to Noise Ratio (SNR)
You can view and review the lecture materials indefinitely, like an on-demand channel.
Definitely! If you have an internet connection, courses on Udemy are available on any device at any time. If you don't have an internet connection, some instructors also let their students download course lectures. That's up to the instructor though, so make sure you get on their good side!
5
5 out of 5
3 Ratings

Detailed Rating

Stars 5
3
Stars 4
0
Stars 3
0
Stars 2
0
Stars 1
0
7d3f8f4787266098d2e3875e0c2daa76
30-Day Money-Back Guarantee

Includes

14 hours on-demand video
Full lifetime access
Access on mobile and TV
Certificate of Completion

External Links May Contain Affiliate Links read more

Join our Telegram Channel To Get Latest Notification & Course Updates!
Join Our Telegram For FREE Courses & Canva PremiumJOIN NOW