AutoCAD 2D & 3D | AutoCAD Civil & Architectural
- Description
- Curriculum
- FAQ
- Reviews
Enhance your AutoCAD design skills by joining this AutoCAD 2D & 3D Training.
Autodesk is the parent organization of AutoCAD. Autodesk has many products but it is not wrong to say that AutoCAD is one of the most used products of Autodesk globally. AutoCAD is used in different engineering fields like Civil, Mechanical, Architecture, Electrical, Electronics, etc. But this AutoCAD course is not designed from AutoCAD Mechanical or AutoCAD Electrical perspective. It means this AutoCAD course is limited to AutoCAD Civil, Architectural & Interior, or Exterior Designing fields only.
We will start this AutoCAD course with ‘Introduction of AutoCAD Interface’ & basic commands. We will cover so many 2D commands from the AutoCAD Drafting & Annotation workspace. Once we get enough knowledge of AutoCAD 2D commands then we will start working on the project & will create a complete ground+1 story 2D House Plan, along with Front Elevation & Sectional Elevation in AutoCAD. Also, we will see how to place different interior fixtures like furniture in AutoCAD. We will see how to print the drawing file in AutoCAD & how to use the external references in AutoCAD. After all this 2D work we will switch to the 3D modeling workspace & create the 3D Elevation of the plan & in the last, we will apply different materials & textures to the 3D Elevation. We will do the rendering of the 3D House as well in AutoCAD. By the end, you will have learned to do all this 2D & 3D work in AutoCAD without any external software. We will do all this work by the use of AutoCAD 2D & 3D commands.
This AutoCAD 2D & 3D course has a total of 86 video lectures with a total length of more than 14 hours. This AutoCAD 2D & 3D course is designed by assuming that you are using the AutoCAD for the very first time but if you already have some knowledge about AutoCAD or worked before in AutoCAD then you can skip those basic level lectures.
This course is designed in AutoCAD 2017 version but it can be easily learned in almost any older or latest version of AutoCAD.
Some files are attached as resources you can download and use.
This AutoCAD course is divided into the following sections:
-
AutoCAD presets
-
Draw Toolbar
-
Modify Toolbar
-
Status Bar Keys
-
Text in AutoCAD
-
Table in AutoCAD
-
Dimensions in AutoCAD
-
Multi Leaders in AutoCAD
-
Block & Group Commands
-
Object & Layer Properties
-
Utilities in AutoCAD
-
2D House Plan in AutoCAD
-
Printing the File & External References in AutoCAD
-
3D Elevation in AutoCAD
-
Materials & Rendering in AutoCAD
There are so many topics to learn under these sections & I will suggest must go through all the videos. Don’t skip if you properly want to get the outcome of this course.
Note: It is requested to everyone must go through all the topic titles before enrolling in this course. Also, I tried to explain the course content in the description as well & have made enough videos available for free preview so that you can decide if you should get this course or not. I recommend joining the course only if you think this course matches your expectations because I don’t want to see anyone disappointed at the end.
So, If You are Satisfied Hit the Enroll Now Button & Enjoy the Course. Happy Learning!
-
1Introduction to AutoCAD InterfaceVideo lesson
In this video, we will know about AutoCAD Interface.
-
2Customizing the AutoCAD InterfaceVideo lesson
In this video, we will learn how to customize the AutoCAD Interface.
-
3AutoCAD Classic WorkspaceVideo lesson
AutoCAD Classic is a very basic interface for 2d work. In this video, we will know about AutoCAD Classic Interface.
-
4Navigation Tools in AutoCADVideo lesson
In this video, we will learn about Navigation tools like Zoom, Pan, Orbit, etc.
-
5Cursor Settings in AutoCADVideo lesson
In this video, we will know about cursor settings. We will learn how to customize the cursor crosshair & pick box size.
-
6Saving the AutoCAD FileVideo lesson
In this video, we will learn how to save the drawing file in AutoCAD.
-
7Unit & Limit SettingsVideo lesson
In this video, we will learn how to set the units & limits in AutoCAD.
-
8Line CommandVideo lesson
In this video, we will learn about the Line command in AutoCAD.
-
9Polyline CommandVideo lesson
When multiple lines are joined they form a polyline. In this video, we will learn about the Polyline command in AutoCAD.
-
10Circle CommandVideo lesson
In this video, we will learn about the Circle command in AutoCAD.
-
11Arc CommandVideo lesson
In this video, we will learn about the Arc command in AutoCAD.
-
12Rectangle CommandVideo lesson
In this video, we will learn about the Rectangle command in AutoCAD.
-
13Polygon CommandVideo lesson
In this video, we will learn about the Polygon command in AutoCAD.
-
14Ellipse CommandVideo lesson
In this video, we will learn about the Ellipse command in AutoCAD.
-
15Spline CommandVideo lesson
In this video, we will learn about the Spline command in AutoCAD.
-
16Construction Line & Ray CommandVideo lesson
In this video, we will learn about Construction Line & Ray commands in AutoCAD.
-
17Point CommandVideo lesson
In this video, we will learn about the Point command in AutoCAD.
-
18Divide & Measure CommandsVideo lesson
In this video, we will learn about Divide & Measure commands in AutoCAD.
-
19Hatch CommandVideo lesson
In this video, we will learn about the Hatch command in AutoCAD.
-
20Gradient CommandVideo lesson
In this video, we will learn about the Gradient command in AutoCAD.
-
21Boundary & Region CommandsVideo lesson
In this video, we will learn about Boundary & Region commands in AutoCAD.
-
22Copy & Move CommandsVideo lesson
In this video, we will learn about Copy & Move commands in AutoCAD.
-
23Trim CommandVideo lesson
In this video, we will know about different ways of using the Trim command in AutoCAD.
-
24Extend CommandVideo lesson
In this video, we will learn about Extend command in AutoCAD.
-
25Erase CommandVideo lesson
In this video, we will learn about Erase command in AutoCAD.
-
26Rotate CommandVideo lesson
In this video, we will learn about Rotate command in AutoCAD.
-
27Mirror CommandVideo lesson
In this video, we will learn about Mirror command in AutoCAD.
-
28Fillet CommandVideo lesson
In this video, we will learn about Fillet command in AutoCAD.
-
29Chamfer CommandVideo lesson
In this video, we will learn about Chamfer command in AutoCAD.
-
30Explode CommandVideo lesson
In this video, we will learn about Explode command in AutoCAD.
-
31Stretch CommandVideo lesson
In this video, we will learn about Stretch command in AutoCAD.
-
32Scale CommandVideo lesson
In this video, we will learn about Scale command in AutoCAD.
-
33Offset CommandVideo lesson
In this video, we will learn about Offset command in AutoCAD.
-
34Lengthen CommandVideo lesson
In this video, we will learn about Lengthen command in AutoCAD.
-
35Align CommandVideo lesson
In this video, we will learn about Align command in AutoCAD.
-
36Break CommandVideo lesson
In this video, we will learn about Break command in AutoCAD.
-
37Join CommandVideo lesson
In this video, we will learn about Join command in AutoCAD.
-
38Overkill CommandVideo lesson
In this video, we will learn about Overkill command in AutoCAD.
-
39Rectangular Array CommandVideo lesson
Array commands are used when we want the repetitive pattern of an object. A rectangular Array is used when we need repetitive patterns in a rectangular orientation. In this video, we will learn about the Rectangular Array command in AutoCAD.
-
40Polar Array CommandVideo lesson
A Polar Array is used when we need repetitive patterns in a circular orientation. In this video, we will learn about the Polar Array command in AutoCAD.
-
41Path Array CommandVideo lesson
A Path Array is used when we need repetitive patterns along a path. In this video, we will learn about the Path Array command in AutoCAD.
-
42Selection Methods in AutoCADVideo lesson
In this video, we will learn about different Object Selection Methods in AutoCAD.
-
43Grid & Snap ModeVideo lesson
In this video, we will learn about Grid & Snap mode in AutoCAD.
-
44Dynamic InputVideo lesson
In this video, we will learn about Dynamic Input in AutoCAD.
-
45Ortho Mode & Polar TrackingVideo lesson
In this video, we will learn about Ortho mode & Polar Tracking in AutoCAD.
-
46Object SnapVideo lesson
In this video, we will learn about Object Snap settings in AutoCAD.
-
47Object Snap TrackingVideo lesson
In this video, we will learn about Object Snap Tracking in AutoCAD.
-
48Other Status Bar KeysVideo lesson
In this video, we will learn about some more status bar keys like selection cycling, dynamic UCS, quick properties, isolating objects, etc.
-
49Single Line Text CommandVideo lesson
In this video, we will learn about the Single Line Text command in AutoCAD.
-
50Customizing the Text StyleVideo lesson
In this video, we will learn how to customize the Text Style in AutoCAD.
-
51Multi Line Text CommandVideo lesson
In this video, we will learn about the Multi-Line Text command in AutoCAD.
-
52Table Command -01Video lesson
In this video, we will learn about the Table command in AutoCAD.
-
53Table Command -02Video lesson
In this video, we will continue the Table command & learn the remaining options.
-
54Customizing the Table StyleVideo lesson
In this video, we will learn how to customize the Table Style in AutoCAD.
-
55Dimension Options in AutoCADVideo lesson
In this video, we will learn about different Dimension options in AutoCAD.
-
56Dimension CommandVideo lesson
In this video, we will learn how to use different dimension options with the Dimension command in AutoCAD.
-
57Quick DimensionVideo lesson
In this video, we will learn about the Quick Dimension command in AutoCAD.
-
58Continue & Baseline Dimension OptionsVideo lesson
In this video, we will learn about the Continue & Baseline Dimension options in AutoCAD.
-
59Customizing the Dimension StyleVideo lesson
In this video, we will learn how to customize the Dimension Style in AutoCAD.
-
60Override Dimension StyleVideo lesson
In this video, we will learn about the Override Dimension Style option in AutoCAD.
-
61Tolerance Options in AutoCADVideo lesson
In this video, we will learn about the different Tolerances options in AutoCAD.
-
64Creating Block in AutoCADVideo lesson
Block command is used to make multiple objects act as a single object. In this video, we will learn about the Block command in AutoCAD.
-
65Inserting & Editing BlocksVideo lesson
In this video, we will learn to insert & edit the Blocks in AutoCAD.
-
66Creating Group in AutoCADVideo lesson
Group command is used to create a set of different objects or blocks. In this video, we will learn about the Group command in AutoCAD.
-
67Object PropertiesVideo lesson
In this video, we will learn how to change the different object properties like line type, line weight, color, scale, etc.
-
68Layer Toolbar -01Video lesson
In this video, we will know about layers, why we use layers & how to set different object properties in different layers.
-
69Layer Toolbar -02Video lesson
In this video, we will continue & learn the remaining Layer options.
-
72Creating Location Plan of HouseVideo lesson
From this video, we will start working on our project. In this video, we will create the Location Plan of the House.
-
73Creating Ground Floor PlanVideo lesson
In this video, we will use different 2D commands to create the Ground Floor Plan.
-
74Creating Stairs, Doors & WindowsVideo lesson
In this video, we will create & place the Stairs, Doors & Windows in our Plan.
-
75Inserting Text in PlanVideo lesson
In this video, we will add Text to show the different areas of the House Plan.
-
76Inserting Dimensions in PlanVideo lesson
In this video, we will show the Dimensions of the House Plan.
-
77Placing the Interior Fixtures in PlanVideo lesson
In this video, we will place the furniture & other interior fixtures in the House Plan.
-
78Creating First Floor PlanVideo lesson
In this video, we will create the First Floor Plan.
-
79Creating Front ElevationVideo lesson
In this video, we will create the Front Elevation of the Ground+1 Story House Plan.
-
80Creating Sectional ElevationVideo lesson
In this video, we will create the Sectional Elevation of the Ground+1 Story House Plan.
-
81Printing or Plotting the Drawing FileVideo lesson
In this video, we will learn how to print or plot the drawing file in AutoCAD.
-
82External ReferencesVideo lesson
In this video, we will learn how to use External References in AutoCAD. We will see how to insert different drawing files as external references & then export or share that file.
-
83Creating 3D Elevation of PlanVideo lesson
From this video, we will start working in 3D. In this video, we will use different 3D tools to create the 3D Elevation of the Ground+1 Story House Plan.
-
84Creating & Placing the 3D StairsVideo lesson
In this video, we will use different 3D tools to create & place the 3D Stairs in our Plan.

External Links May Contain Affiliate Links read more